Guide For Generative Shape Design
Entering the Shape Design Workbench and Selecting a Part Entering the Generative Shape Design Workbench This first task shows you how to enter the Generative Shape Design workbench and open a wireframe design part. Before starting this scenario, you should be familiar with the basic commands common to all workbenches. These are described in the Infrastructure User's Guide.
Select Shape - Generative Shape Design from the Start menu. The Generative Shape Design workbench is displayed. The New Part name dialog box may appear depending on the way you customized your session. It provides a field for entering the name you wish to assign to the part, an option that enables hybrid design an two other options to insert a geometrical set and/or in the part to be created. If you select Enable hybrid design, the capability then applies to all the bodies you will create in your CATIA session (and not only to the new CATPart document you are opening). Consequently, if your session contains CATPart documents already including traditional bodies, the new bodies you will create subsequently in these documents will possibly include wireframe and surface elements.
Guide For Generative Shape Design 2
To facilitate your design, It is therefore recommended that you do not change this setting during your session. For more information, refer to the Part Document chapter in Customizing section of the Part Design documentation. Select File - Open from the menu bar and navigate to the samples directory. John deere d100 repair manuals. Select the document. A wireframe design part is displayed:. You can add the Generative Shape Design workbench to your Favorites, using the Tools Customize item from the menu bar. For more information, refer to the Infrastructure User's Guide.
Guide For Generative Shape Design Unfold
If you wish to use the whole screen space for the geometry, remove the specification tree by selecting the View - Specifications c ommand or pressing F3.